Author: Paul Kurowski

Publisher: SDC Publications

ISBN: 1630571652

Category: Computers

Page: 302

View: 2444

Author: Paul Kurowski

Publisher: SDC Publications

ISBN: 1630571652

Category: Computers

Page: 302

View: 2444

Thermal Analysis with SOLIDWORKS Simulation 2018 goes beyond the standard software manual. It concurrently introduces the reader to thermal analysis and its implementation in SOLIDWORKS Simulation using hands-on exercises. A number of projects are presented to illustrate thermal analysis and related topics. Each chapter is designed to build on the skills and understanding gained from previous exercises. Thermal Analysis with SOLIDWORKS Simulation 2018 is designed for users who are already familiar with the basics of Finite Element Analysis (FEA) using SOLIDWORKS Simulation or who have completed the book Engineering Analysis with SOLIDWORKS Simulation 2018. Thermal Analysis with SOLIDWORKS Simulation 2018 builds on these topics in the area of thermal analysis. Some understanding of FEA and SOLIDWORKS Simulation is assumed.

Author: Paul Kurowski

Publisher: SDC Publications

ISBN: 1630571598

Category: Computers

Page: 348

View: 7148

Vibration Analysis with SOLIDWORKS Simulation 2018 goes beyond the standard software manual. It concurrently introduces the reader to vibration analysis and its implementation in SOLIDWORKS Simulation using hands-on exercises. A number of projects are presented to illustrate vibration analysis and related topics. Each chapter is designed to build on the skills and understanding gained from previous exercises. Vibration Analysis with SOLIDWORKS Simulation 2018 is designed for users who are already familiar with the basics of Finite Element Analysis (FEA) using SOLIDWORKS Simulation or who have completed the book Engineering Analysis with SOLIDWORKS Simulation 2018. Vibration Analysis with SOLIDWORKS Simulation 2018 builds on these topics in the area of vibration analysis. Some understanding of structural analysis and solid mechanics is recommended.

Author: Paul Kurowski

Publisher: SDC Publications

ISBN: 1630571539

Category: Computers

Page: 596

View: 7340

Engineering Analysis with SOLIDWORKS Simulation 2018 goes beyond the standard software manual. Its unique approach concurrently introduces you to the SOLIDWORKS Simulation 2018 software and the fundamentals of Finite Element Analysis (FEA) through hands-on exercises. A number of projects are presented using commonly used parts to illustrate the analysis features of SOLIDWORKS Simulation. Each chapter is designed to build on the skills, experiences and understanding gained from the previous chapters.

Author: John Matsson

Publisher: SDC Publications

ISBN: 1585035890

Category: Computers

Page: 297

View: 7827

An Introduction to SolidWorks Flow Simulation 2010 takes the reader through the steps of creating the SolidWorks part for the simulation followed by the setup and calculation of the SolidWorks Flow Simulation project. The results from calculations are visualized and compared with theoretical solutions and empirical data. Each chapter starts with the objectives and a description of the specific problems that are studied. End of chapter exercises are included for reinforcement and practice of what has been learned. The twelve chapters of this book are directed towards first-time to intermediate level users of SolidWorks Flow Simulation. It is intended to be a supplement to undergraduate Fluid Mechanics and Heat Transfer related courses. This book can also be used to show students the capabilities of fluid flow and heat transfer simulations in freshman and sophomore courses such as Introduction to Engineering. Both internal and external flow problems are covered and compared with experimental results and analytical solutions. Covered topics include airfoil flow, boundary layers, flow meters, heat exchanger, natural and forced convection, pipe flow, rotating flow, tube bank flow and valve flow.

Author: Randy Shih

Publisher: SDC Publications

ISBN: 1585038571

Category: Computers

Page: 445

View: 2471

The primary goal of Introduction to Finite Element Analysis Using SolidWorks Simulation 2014 is to introduce the aspects of Finite Element Analysis (FEA) that are important to engineers and designers. Theoretical aspects of FEA are also introduced as they are needed to help better understand the operation. The primary emphasis of the text is placed on the practical concepts and procedures needed to use SolidWorks Simulation in performing Linear Static Stress Analysis and basic Modal Analysis. This text covers SolidWorks Simulation and the lessons proceed in a pedagogical fashion to guide you from constructing basic truss elements to generating three-dimensional solid elements from solid models. This text takes a hands-on, exercise-intensive approach to all the important FEA techniques and concepts. This textbook contains a series of thirteen tutorial style lessons designed to introduce beginning FEA users to SolidWorks Simulation. The basic premise of this book is that the more designs you create using SolidWorks Simulation, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons.

Author: John R. Steffen

Publisher: SDC Publications

ISBN: 1585038563

Category: Computers

Page: 434

View: 4043

Analysis of Machine Elements Using SolidWorks Simulation 2014 is written primarily for first-time SolidWorks Simulation 2014 users who wish to understand finite element analysis capabilities applicable to stress analysis of mechanical elements. The focus of examples is on problems commonly found in an introductory, undergraduate, Design of Machine Elements or similarly named courses. In order to be compatible with most machine design textbooks, this text begins with problems that can be solved with a basic understanding of mechanics of materials. Problem types quickly migrate to include states of stress found in more specialized situations common to a design of mechanical elements course. Paralleling this progression of problem types, each chapter introduces new software concepts and capabilities. Many examples are accompanied by problem solutions based on use of classical equations for stress determination. Unlike many step-by-step user guides that only list a succession of steps, which if followed correctly lead to successful solution of a problem, this text attempts to provide insight into why each step is performed. This approach amplifies two fundamental tents of this text. The first is that a better understanding of course topics related to stress determination is realized when classical methods and finite element solutions are considered together. The second tenet is that finite element solutions should always be verified by checking, whether by classical stress equations or experimentation. Each chapter begins with a list of learning objectives related to specific capabilities of the SolidWorks Simulation program introduced in that chapter. Most software capabilities are repeated in subsequent examples so that users gain familiarity with their purpose and are capable of using them in future problems. All end-of-chapter problems are accompanied by evaluation "check sheets" to facilitate grading assignments.

Author: Paul Kurowski

Publisher: SDC Publications

ISBN: 1585038628

Category: Computers

Page: 280

View: 1297

Thermal Analysis with SolidWorks Simulation 2014 goes beyond the standard software manual. It concurrently introduces the reader to thermal analysis and its implementation in SolidWorks Simulation using hands-on exercises. A number of projects are presented to illustrate thermal analysis and related topics. Each chapter is designed to build on the skills and understanding gained from previous exercises. Thermal Analysis with SolidWorks Simulation 2014 is designed for users who are already familiar with the basics of Finite Element Analysis (FEA) using SolidWorks Simulation or who have completed the book Engineering Analysis with SolidWorks Simulation 2014. Thermal Analysis with SolidWorks Simulation 2014 builds on these topics in the area of thermal analysis. Some understanding of FEA and SolidWorks Simulation is assumed.

Author: Gaurav Verma

Publisher: Cadcamcae Works

ISBN: 9781988722252

Category:

Page: 212

View: 8297

The SolidWorks Flow Simulation 2018 Black Book is the 1st edition of our series on SolidWorks Flow Simulation. The book is targeted for beginners of SolidWorks Flow Simulation. This book covers the basic equations and terms of Fluid Dynamics theory. The book covers all the major tools of Flow Simulation modules like Fluid Flow, Thermal Fluid Flow, and Electronic Cooling modules. This book can be used as supplement to Fluid Dynamics course if your subject requires the application of Software for solving real-world problems. Some of the salient features of this book are: In-Depth explanation of concepts Every new topic of this book starts with the explanation of the basic concepts. In this way, the user becomes capable of relating the things with real world. Topics Covered Every chapter starts with a list of topics being covered in that chapter. In this way, the user can easy find the topic of his/her interest easily. Instruction through illustration The instructions to perform any action are provided by maximum number of illustrations so that the user can perform the actions discussed in the book easily and effectively. There are about 350 illustrations that make the learning process effective. Tutorial point of view At the end of concept's explanation, the tutorial make the understanding of users firm and long lasting. Almost each chapter of the book has tutorials that are real world projects. Moreover, most of the tools in this book are discussed in the form of tutorials. Project Free projects and exercises are provided to students for practicing. For Faculty If you are a faculty member, then you can ask for video tutorials on any of the topic, exercise, tutorial, or concept.

Author: Huei-Huang Lee

Publisher: SDC Publications

ISBN: 1585039373

Category: Computers

Page: 280

View: 3905

This book is designed as a software-based lab book to complement a standard textbook in a mechanics of material course, which is usually taught at the undergraduate level. This book can also be used as an auxiliary workbook in a CAE or Finite Element Analysis course for undergraduate students. Each book comes with a disc containing video demonstrations, a quick introduction to SOLIDWORKS, and all the part files used in the book. This textbook has been carefully developed with the understanding that CAE software has developed to a point that it can be used as a tool to aid students in learning engineering ideas, concepts and even formulas. These concepts are demonstrated in each section of this book. Using the graphics-based tools of SOLIDWORKS Simulation can help reduce the dependency on mathematics to teach these concepts substantially. The contents of this book have been written to match the contents of most mechanics of materials textbooks. There are 14 chapters in this book. Each chapter is designed as one week’s workload, consisting of 2 to 3 sections. Each section is designed for a student to follow the exact steps in that section and learn a concept or topic of mechanics of materials. Typically, each section takes 15-40 minutes to complete the exercises. Each copy of this book comes with a disc containing videos that demonstrate the steps used in each section of the book, a 123 page introduction to Part and Assembly Modeling with SOLIDWORKS in PDF format, and all the files readers may need if they have any trouble. The concise introduction to SOLIDWORKS pdf is designed for those students who have no experience with SOLIDWORKS and want to feel more comfortable working on the exercises in this book. All of the same content is available for download on the book’s companion website.

Author: Kuang-Hua Chang

Publisher: SDC Publications

ISBN: 1630571571

Category: Computers

Page: N.A

View: 8194

Motion Simulation and Mechanism Design with SOLIDWORKS Motion 2018 is written to help you become familiar with SOLIDWORKS Motion, an add-on module of the SOLIDWORKS software family. This book covers the basic concepts and frequently used commands required to advance readers from a novice to intermediate level in using SOLIDWORKS Motion. SOLIDWORKS Motion allows you to use solid models created in SOLIDWORKS to simulate and visualize mechanism motion and performance. Using SOLIDWORKS Motion early in the product development stage could prevent costly redesign due to design defects found in the physical testing phase. Therefore, using SOLIDWORKS Motion contributes to a more cost effective, reliable, and efficient product design process. Basic concepts discussed in this book include model generation, such as creating assembly mates for proper motion; carrying out simulation and animation; and visualizing simulation results, such as graphs and spreadsheet data. These concepts are introduced using simple, yet realistic examples. Verifying the results obtained from the computer simulation is extremely important. One of the unique features of this book is the incorporation of theoretical discussions for kinematic and dynamic analyses in conjunction with the simulation results obtained using SOLIDWORKS Motion. Verifying the simulation results will increase your confidence in using the software and prevent you from being fooled by erroneous simulations.

*A Guide to Thermal Power Plants*

Author: Swapan Basu,Ajay Debnath

Publisher: Academic Press

ISBN: 0128011734

Category: Technology & Engineering

Page: 942

View: 6874

The book discusses instrumentation and control in modern fossil fuel power plants, with an emphasis on selecting the most appropriate systems subject to constraints engineers have for their projects. It provides all the plant process and design details, including specification sheets and standards currently followed in the plant. Among the unique features of the book are the inclusion of control loop strategies and BMS/FSSS step by step logic, coverage of analytical instruments and technologies for pollution and energy savings, and coverage of the trends toward filed bus systems and integration of subsystems into one network with the help of embedded controllers and OPC interfaces. The book includes comprehensive listings of operating values and ranges of parameters for temperature, pressure, flow, level, etc of a typical 250/500 MW thermal power plant. Appropriate for project engineers as well as instrumentation/control engineers, the book also includes tables, charts, and figures from real-life projects around the world. Covers systems in use in a wide range of power plants: conventional thermal power plants, combined/cogen plants, supercritical plants, and once through boilers Presents practical design aspects and current trends in instrumentation Discusses why and how to change control strategies when systems are updated/changed Provides instrumentation selection techniques based on operating parameters. Spec sheets are included for each type of instrument. Consistent with current professional practice in North America, Europe, and India

*Via SolidWorks*

Author: John Edward Akin

Publisher: World Scientific Publishing Company

ISBN: 9813107928

Category: Computers

Page: 348

View: 9622

Young engineers are often required to utilize commercial finite element software without having had a course on finite element theory. That can lead to computer-aided design errors. This book outlines the basic theory, with a minimum of mathematics, and how its phases are structured within a typical software. The importance of estimating a solution, or verifying the results, by other means is emphasized and illustrated. The book also demonstrates the common processes for utilizing the typical graphical icon interfaces in commercial codes. In particular, the book uses and covers the widely utilized SolidWorks solid modeling and simulation system to demonstrate applications in heat transfer, stress analysis, vibrations, buckling, and other fields. The book, with its detailed applications, will appeal to upper-level undergraduates as well as engineers new to industry.

Author: David C. Planchard,Marie P. Planchard

Publisher: SDC Publications

ISBN: 158503777X

Category: Computers

Page: 776

View: 9207

Engineering Design with SolidWorks 2013 and Video Instruction is written to assist students, designers, engineers and professionals. The book provides a solid foundation in SolidWorks by utilizing projects with step-by-step instructions for the beginner to intermediate SolidWorks user. Explore the user interface, CommandManager, menus, toolbars and modeling techniques to create parts, assemblies and drawings in an engineering environment. Follow the step-by-step instructions and develop multiple parts and assemblies that combine machined, plastic and sheet metal components. Formulate the skills to create, modify and edit sketches and solid features. Learn the techniques to reuse features, parts and assemblies through symmetry, patterns, copied components, design tables, Bills of Materials, Custom Properties and Configurations. Address various SolidWorks analysis tools: SimulationXpress, Sustainability / SustainabilityXpress and DFMXpress and Intelligent Modeling techniques. Learn by doing, not just by reading! Desired outcomes and usage competencies are listed for each project. Know your objective up front. Follow the steps in Project 1 - 8 to achieve the design goals. Work between multiple documents, features, commands and custom properties that represent how engineers and designers utilize SolidWorks in industry. Review individual features, commands and tools with the enclosed Video Instruction DVD. The projects contain exercises. The exercises analyze and examine usage competencies. Collaborate with leading industry suppliers such as SMC Corporation of America, Boston Gear and 80/20 Inc. Collaborative information translates into numerous formats such as paper drawings, electronic files, rendered images and animations. On-line intelligent catalogs guide designers to the product that meets both their geometric requirements and performance functionality. The authors developed the industry scenarios by combining their own industry experience with the knowledge of engineers, department managers, vendors and manufacturers. These professionals are directly involved with SolidWorks every day. Their responsibilities go far beyond the creation of just a 3D model. The book is design to compliment the SolidWorks Tutorials contained in SolidWorks 2013. There are over 2.5 hours of video instructions on the enclosed DVD.

Author: Prof Sham Tickoo Purdue Univ

Publisher: N.A

ISBN: 9781936646982

Category:

Page: 432

View: 6769

Autodesk Simulation Mechanical 2015 book has been written with an intention to assist engineers, engineering students, and practicing designers new to the field of FEA or CAE. The textbook covers FEA concepts, modeling, and analysis of engineering problems using Autodesk Simulation Mechanical. In addition, enough theoretical background is offered to allow individuals to use Autodesk Simulation Mechanical as simulation package. Autodesk Simulation Mechanical 2016 book covers Static Stress Analysis, Natural Frequency (Modal) Analysis, Frequency Response Analysis, Transient Stress Analysis, and Non-linear Analysis.

Author: Huei-Huang Lee

Publisher: SDC Publications

ISBN: 1630571733

Category: Computers

Page: 612

View: 342

Finite Element Simulations with ANSYS Workbench 18 is a comprehensive and easy to understand workbook. Printed in full color, it utilizes rich graphics and step-by-step instructions to guide you through learning how to perform finite element simulations using ANSYS Workbench. Twenty seven real world case studies are used throughout the book. Many of these case studies are industrial or research projects that you build from scratch. Prebuilt project files are available for download should you run into any problems. Companion videos, that demonstrate exactly how to perform each tutorial, are also available. Relevant background knowledge is reviewed whenever necessary. To be efficient, the review is conceptual rather than mathematical. Key concepts are inserted whenever appropriate and summarized at the end of each chapter. Additional exercises or extension research problems are provided as homework at the end of each chapter. A learning approach emphasizing hands-on experiences is utilized though this entire book. A typical chapter consists of six sections. The first two provide two step-by-step examples. The third section tries to complement the exercises by providing a more systematic view of the chapter subject. The following two sections provide more exercises. The final section provides review problems.

Author: Paul Tran

Publisher: SDC Publications

ISBN: 1585037680

Category: Computers

Page: 688

View: 9449

SolidWorks 2013 Part I - Basic Tools introduces new users to the SolidWorks interface, SolidWorks tools and basic modeling techniques. It provides readers with a strong understanding of SolidWorks and covers the creation of parts, assemblies and drawings. Every lesson and exercise in this book was created based on real world projects. Each of these projects have been broken down and developed into easy and comprehensible steps for the reader. Furthermore, at the end of every chapter there are self test questionnaires to ensure that the reader has gained sufficient knowledge from each section before moving on to more advanced lessons. This book takes the approach that in order to understand SolidWorks, inside and out, the reader should create everything from the beginning and take it step by step.

*ICBGM '95 : proceedings of the 1995 Western Simulation MultiConference, January 15-18, 1995, Tropicana Hotel, Las Vegas, Nevada*

Author: Society for Computer Simulation

Publisher: Society for Computer Simulation International

ISBN: N.A

Category: Computers

Page: 310

View: 6500

Author: David Planchard,Marie Planchard

Publisher: SDC Publications

ISBN: 158503780X

Category: Computers

Page: 504

View: 9836

Engineering Graphics with SolidWorks 2013 and Video Instruction DVD is written to assist technical school, two year college, four year university instructor/student or industry professional that is a beginner or intermediate SolidWorks user. The book combines the fundamentals of engineering graphics and dimensioning practices with a step-by-step project based approach to learning SolidWorks with the enclosed 1.5 hour Video Instruction DVD. Learn by doing, not just by reading. The book is divided into two parts: Engineering Graphics and SolidWorks 3D CAD software. In Chapter 1 through Chapter 3, you explore the history of engineering graphics, manual sketching techniques, orthographic projection, isometric projection, multi-view drawings, dimensioning practices and the history of CAD leading to the development of SolidWorks. In Chapter 4 through Chapter 8, you apply engineering graphics fundamentals and learn the SolidWorks User Interface, Document and System properties, simple parts, simple and complex assemblies, design tables, configurations, multi-sheet, multi-view drawings, Bill of Materials, Revision tables, basic and advanced features. Follow the step-by-step instructions in over 70 activities to develop eight parts, four sub-assemblies, three drawings, and six document templates. Formulate the skills to create and modify solid features to model a 3D FLASHLIGHT assembly. Chapter 9 provides a bonus section on the Certified SolidWorks Associate CSWA program with sample exam questions and initial and final SolidWorks models. Passing the CSWA exam proves to employers that you have the necessary fundamental engineering graphics and SolidWorks competencies. Review individual features, commands, and tools for each project with the book’s 1.5 hour Video Instruction DVD and SolidWorks Help. The chapter exercises analyze and examine usage competencies based on the project objectives. The book is designed to complement the SolidWorks Tutorials located in the SolidWorks Help menu. Each section explores the SolidWorks Online User’s Guide to build your working knowledge of SolidWorks. Desired outcomes and usage competencies are listed for each project. Know your objectives up front. Follow the step-by step procedures to achieve your design goals. Work between multiple documents, features, commands, and properties that represent how engineers and designers utilize SolidWorks in industry. The authors developed the industry scenarios by combining their own industry experience with the knowledge of engineers, department managers, vendors, and manufacturers. These professionals are directly involved with SolidWorks every day. Their responsibilities go far beyond the creation of just a 3D model.

Author: Klaus-Jürgen Bathe

Publisher: Klaus-Jurgen Bathe

ISBN: 9780979004902

Category: Engineering mathematics

Page: 1037

View: 1570

Author: Shawna Lockhart

Publisher: SDC Publications

ISBN: 1585037214

Category: Computers

Page: 647

View: 7004

A Tutorial Guide to AutoCAD 2013 provides a step-by-step introduction to AutoCAD with commands presented in the context of each tutorial. In fifteen clear and comprehensive chapters, author Shawna Lockhart guides readers through all the important commands and techniques in AutoCAD 2013, from 2D drawing to solid modeling and finally finishing with rendering. In each lesson, the author provides step-by-step instructions with frequent illustrations showing exactly what appears on the AutoCAD screen. Later, individual steps are no longer provided, and readers are asked to apply what they've learned by completing sequences on their own. A carefully developed pedagogy reinforces this cumulative-learning approach and supports readers in becoming skilled AutoCAD users. A Tutorial Guide to AutoCAD 2013 begins with three Getting Started chapters that include information to get readers of all levels prepared for the tutorials. The author includes tips that offer suggestions and warnings as you progress through the tutorials. Key Terms and Key Commands are listed at the end of each chapter to recap important topics and commands learned in each tutorial. Also, a glossary of terms and Commands Summary lists the key commands used in the tutorials. Each chapter concludes with end of chapter problems providing challenges to a range of abilities in mechanical, electrical, and civil engineering as well as architectural problems.